BFT launches the first Somfy compatible solution for smart native motors: EasyAXS Connectivity Modules.
Thanks to the 2 expansion cards pluged into the motors’ control board, they become natively connected, meaning that they can be paired to TaHoma® app directly, without the need of a gateway.
The modules come in 2 different versions:
These modules can be used through TaHoma® in 2 cases:
Process:
1. Select "A BFT EasyAXS connected access product"
2. Login or create your Somfy account
3. Select your country
4. Go close to your BFT product
5. Authorize TaHoma® app to access Bluetooth
6. Wait the detection of your BFT equipment
7. If several devices have been detected, select the one you want to connect
8. Wait for the scanning of your Wi-Fi networks
9. Select the Wi-Fi networks
10. Your BFT equipment is paired and ready to be used with Tahoma® app!
Ysia Patio io is compatible with io equipment:
Terrace & Outdoor:
Shutters & External Screens:
Heating & lighting:
*ON/OFF Dimming **ON/OFF Dimming RGB & White balance
Doors & gate:
Accordance with EN12453 concerning the safe use of doors and gates, the use of Ysia Patio io for controlling an automatic garage door or gate without user visibility, necessarily requires the installation of a safety system type photocell.
Windows:
Add-ons & partners:
*TELECO compatibility will be confirmed with the io TELECO products launches
Do not use with Alarms
No limitation on:
The ingress protection code of Ysia Patio is (IP) 44. So the remote has high resistance against shocks, falls and water splashes.
You can use it outside, but it must be stored indoors on its wall support.
Before pairing a product, you need to create the channel which controls it.
Information: You can create 16 product/group channels.
1. Choose the type of channel
There are two types of channel:
2. Choose the product type to drive
Select the product type of the channel.
See the following FAQ for more information: What kind of equipment my Ysia Patio io can control?
In case of error, go in the settings menu to edit the channel.
3. Choose a name to describe and personalize your channel
You can personalize the name among a list of pre-defined name (Product name, South, North, Terrace etc.) or create your own name with a virtual keyboard (max 20 characters).
Once your channel is created, you can pair a new equipment to it.
This FAQ explains how to add a new device that is already programmed and controlled by an individual remote control with your Ysia Patio io.
Information: You must first create a channel that will be linked to the new equipment. If you have not already done so, please follow the FAQ: How to create a new channel on my Ysia Patio io?
1. In navigation mode: scroll to choose the desired channel
2. Place your equipment in pairing mode
Information: To know these ergonomics, look the equipment instructions or Help me app
For a Somfy radio motor: Press and hold 3 seconds the prog button on the back of the individual control point until the drive moves up and down
3. Pair the new equipement
Information: If the remote control screen is black, press any button to turn it on. This press will have no effect and will only light up the Ysia screen.
Briefly press the prog button in the back of the Ysia Patio io. The motor makes a brief up and down movement.
4. The Ysia Patio io is paired with the equipment and ready to be used!
No, pictogram is not editable and linked to product type.
But you can edit the name of the channel (20 charcaters max.) in the settings of the remote contol.
Please always be sure to unpair all your products before resetting the remote.
Resetting the remote doesn’t unpair the linked/paired products.
Information: If you have already reset the remote control without first unpairing the products, you will need to reset these products so that the remote control no longer controls them.
To reset Ysia Patio io, go in the Settings menu, then Remote settings and select Reset remote.
Yes, only roller and tilt window for roof. Not with venitian, lights etc.
When choosing type of product in channel’s creation, select the dedicated section:
By default, it will be adjusted automatically between 3 levels depending on ambient brightness:
You can change it manually in settings-> remote settings -> brightness -> manually from 5 to 100%.
Information: If you let it at 100%, it will affect the battery life.
To edit an existing channel of your remote control go in the Settings menu and select Channel settings.
You will able to:
Manu mode allows you to unactivate confort automatisms on the products linked, paired to your Ysia patio io. Confort automatisms are scenarios, timers, sun sensor, rain if set in confort mode (wind is a security sensor and can’t be unactivated).
Via the Settings menu, select Channel settings and then Automatism management. Or you can do it directly in the corresponding channel, in driving mode by pressing validation button 3s.
You can switch from Manu to Auto mode or Auto to Manu (motor linked makes a feedback).
Information: «M» is displayed on the corner when manu mode is activated, nothing when auto is activated.
When the battery level is at a critical level, a special icon will be displayed in the corner of the screen.
Information: When this icon appears, the remote control can still be used for about a month before the battery dies. After this, it will be mandatory to change the batteries (screen will be off).
How to replace batteries on Ysia Patio io:
1. Press in the hole on the back of the control point to release the battery compartment.
Information: Use a pen or a screwdriver (2.8mm max), no screws, needles or other points.
2. Install the batteries or replace the existing ones.
Batteries model: 2x AAA (LR03) 1.5V
3. Slide the battery compartment back into the remote control.
Why is it more difficult than before?
Due to safety standard evolution (IEC 62368-1), legislation is stricter for battery access conditions and require the usage of a tool or two timely separated motions to access the battery.
Reminder: autonomy with a normal usage is 2 years before changing the batteries.
Number of characters is limited to 20. You can modify and personnalize the name via the Channel settings menu.
Information: When this icon appears, the remote control can still be used for about a month before the battery dies. After this, it will be mandatory to change the batteries (screen will be off). See FAQ: How to change batteries on Ysia Patio io?
Check that you select the good profile during the channel selection.
You can change it in settings, channel modification, product type.
Pergola tilt only and pergola tilting retractable have 2 different profiles. Check that you select the good profile.
With your Ysia Patio io, only groups with products from the asame family can be piloted.
With Ysia Patio io you can control a group of the same kind of product (roller shutters, for example). However, you cannot create and control heterogenous group (light + awning for example).
You must first create a group channel. If you have not already done so, please follow the FAQ: How to create a new channel on my Ysia Patio io?
Once your group channel has been created, you need to add the products you want to control with it. To do this, you need to follow the FAQs: How to pair Ysia® Patio io to a new equipement?
Warning: To avoid any programming issue, you need to add the new devices one at a time, going through the entire pairing process for each product.
Norėdami pasiekti geriausią jutiklio veikimą (tikslumą ir pakartojamumą), rinkitės prie sienos tvirtinamą variantą. Temperatūros matavimas bus labiau suderintas su jutimine temperatūra. Kad būtų užtikrintas geras temperatūros matavimas, vadovaukitės padėties nustatymo rekomendacijomis: - venkite tiesioginių saulės spindulių, - pasitraukite nuo šilumos / šalčio šaltinių (idealiu atveju 1 m atstumu nuo radiatoriaus, oro kondicionieriaus, židinio ir kt.), - pasitraukite nuo tiesioginio oro srauto (mažiausiai 25 cm atstumu nuo angos), - venkite uždaros erdvės, kur gaminio neveiks aplinkos oras.
The Netatmo Home Coach and Weather Station sensors are compatible with TaHoma for a variety of possibilities. In your app, you can find all the Netatmo sensors to automate your equipment or manage alerts.
Thanks to TaHoma's compatibility with Netatmo, you can:
1. Manage the air quality in your home:
What are the preconfigured scenes "Airing Notification" and “Smart Airing” in TaHoma?
2. Improve your thermal comfort and save energy
What is the "Thermal comfort" pre-set scene and how to configure it on the TaHoma app?
3. Automate your equipment according to the indoor or outdoor environment:
List of Netatmo compatible sensors with TaHoma :
Home Coach:
Weather station:
*Note that there is a delay of a few minutes between the detection of weather changes and the reaction of your equipment. The Wi-Fi connection must be operational.
You are moving out of your house but want to leave your Somfy gateway behind?
Easily detach your account from the gateway following this procedure:
Select the "..." menu:
Then in "SOMFY & ME" select "Help & advanced features" menu
Select "Remove my installation"
Click on the button: Reset my installation
Then click on "Yes" to let the devices paired to the gateway
Perform the reset by clicking on the confirm button
Congratulation! Your installation has been reset:
Available with all TaHoma app compatible gateways (TaHoma switch, TaHoma V2, Connectivity kit, Connexoon RTS/io, TaHoma Rail DIN V2)
You want to sell your gateway or give it to someone else?
You can easily make a full reset of your box following this procedure.
Then click on "No" to delete the devices paired to the gateway
Available with all TaHoma app compatible gateways (TaHoma switch, TaHoma V2, Connectivity kit, Connexoon RTS/io, TaHoma Rail DIN V2).
Somfy stengiasi pasiūlyti suderintus sprendimus visiems savo vartotojams.
Connexoon programos veiks iki 2027 m. Tačiau jie nebebus atnaujinami.
Priešingai, „TaHoma“ programa yra reguliariai atnaujinama, kad būtų pasiūlyta naujų funkcijų ir suderinamumo.
Jei naudojate „Connexoon io“, visi „io“ produktai bus suderinami, įskaitant partnerių „io“ produktus:
Jei naudojate Connexoon RTS, visi RTS produktai bus suderinami
„io“ ir „RTS Connexoons“ dabar suderinami iš debesies į debesį ir IP. Jūsų sprendimas suderinamas su „Somfy Protect“ produktais, „Somfy“ termostatu, taip pat „Schneider“ išmaniuoju vartojimo jutikliu, „Legrand“ apšvietimu ir išmaniaisiais lizdais, „Sonos“, „Philips Hue“ arba „Intesis“ kintamosios srovės šliuzu.
Visą suderinamumą rasite čia:
Perėjimas iš „Connexoon“ programos į „TaHoma“ programą yra galutinis. Perjungę nebegalėsite grįžti į „Connexoon“ programas.
TaHoma“ programa siūlo visiškai naują dizainą ir sąsają bei išplečia suderinamumą.
Be visiškai pertvarkytos sąsajos, „TaHoma“ programėlėje siūlomos naujos funkcijos, pvz., siūloma scena ir mėgstamiausių meniu.
Naujoji „TaHoma“ programa atnaujinama kelis kartus per metus, kad pasiūlytų jums dar daugiau suderinamumo ir naujų funkcijų.
Kai kurios „Connexoon“ programose pasiekiamos funkcijos nėra pasiekiamos „TaHoma“ programoje.
Perjungę iš „Connexoon“ programėlės į „TaHoma“ programą, prarasite suderinamumą su „Somfy io“ sirena. Visi kiti Somfy produktai išlieka suderinami su TaHoma programa.